Globe Valve supplier in Australia
Australian Valve is the biggest Globe Valve Supplier in Australia. A globe valve is a type of control valve that controls the flow of liquids and gases in fluid systems. It is made up of a stem attached to the disc, a spherical disc that serves as the control element, and a cylindrical body. The disc, which is used to stop or control the flow via the valve, is positioned inside the body using a threaded stem. The globe valve is perfect for applications needing tight control of the fluid flow because the spherical form of the disc generates a flow restriction that enables accurate flow control and shut off. It is frequently employed in systems that call for frequent flow rate control, such as high-pressure systems, steam control, and other applications.
Globe valves can be built of several materials depending on the use, but commonly they are composed of metal alloys like brass, bronze, or stainless steel. The disc might be constructed from metal or a durable material like ceramic or plastic. The hand wheel or other actuation device is attached to the stem, which is normally composed of metal, to enable manual operation. The globe valve's design also makes maintenance and repair simple since the disc and stem may be changed without removing the entire valve from the system.

Australian Valve is a leading Globe Valve Supplier in Australia. We supply to Brisbane, Canberra, Darwin, Hobart, Melbourne, Perth and Sydney.

Parts
 Body
 Disc
 Stem
 Seat
 Gasket
 Hand Wheel or Actuator
 Bonnet
 Yoke
 Packing

Types of globe valve based on the type of body:
 Z Type Globe valve
 T Type Globe valve
 Angle Type Globe valve
 API Globe valve

Advantages
 The disc's distinctive form enables exact fluid flow control, making it the perfect choice for applications requiring strict flow control.
 are frequently composed of metal alloys and contain sturdy, long-lasting control components, which qualify them for use in demanding applications.
 they are appropriate for use in high-pressure, corrosive, and abrasive situations; and they may be utilised for a wide range of fluid kinds and temperatures.
 The globe valve's design makes maintenance and repairs simple since the disc and stem may be changed without removing the entire valve from the system.
 Low pressure drop across the valve is made possible by the flow restriction the disc creates, which increases efficiency by lowering the amount of energy needed to move the fluid.
 may be used in a variety of applications and can be controlled manually or automatically.


Industries
 Power Generation Plants
 Oil and Gas Industry
 Chemical Processing Plants
 Water and Wastewater Treatment Plants
 Marine Industry
 Manufacturing Industry

Globe valves and gate valves are two common types of valves used in industrial applications for regulating the flow of fluids. While both types of valves can control the flow of fluids, there are some key differences between them:
1. Design: To regulate the flow of fluid, globe valves feature a globe-shaped body with a moveable disc that oscillates up and down. To regulate the flow of fluid, gate valves have a rectangular or circular gate that glides into and out of the flow stream.
2. Flow Regulation: Globe valves may be utilised for both throttling and on/off applications and are intended for accurate flow regulation. Gate valves are not advised for precise flow control because they are primarily intended for on/off applications.
3. Pressure Drop: Due to the way fluid flows through the valve, globe valves have a larger pressure drop than gate valves. Gate valves are a better option for applications where pressure loss is a problem since they have a smaller pressure drop.
4. Leakage: Globe valves usually have a decreased likelihood of leaking.


Applications

1. Cooling Water Systems: Power plants, refineries, and other industrial facilities frequently employ globe valves to control the flow of cooling water. They aid in regulating machinery temperature and guard against overheating.
2. Uses in the Oil and Gas Sector: Globe valves are employed in the Oil and Gas Sector to control the flow of oil, gas and other fluids via pipelines and processing machinery.
3. Chemical Processing: In chemical processing plants, globe valves are utilised to regulate the flow of corrosive and dangerous fluids. They may be constructed from corrosion- and wear-resistant materials.

Body material: Cast Iron, Cast steel [A216 WCB, WCC, LCB, LCC, WC6, WC9), Ductile Iron, Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F51, F3, F55, F91]
Class: 150 – 2500; PN10 – PN 450
Size: DN 10 – DN 1200
Ends: Butt weld, Flanged, threaded, socket weld
Operations-: Hand-wheel operated Globe Valve, Pneumatic actuated Globe Valve, Electric actuated Globe Valve, Gear operated Globe Valve

Visit our website- https://www.australianvalve.co....m/product-category/g